|
~ STANDARDS and APPROVALS ~
The shower complies with the requirements
of EN 60335-2-35.
(Ingress protection IPX4)
British Electrotechnical Approvals Board (BEAB) approved.
|
ENTRY POINTS (All Rating Options)
|
|
Electric
|
Water Feed
|
|
Top
|
Bottom
|
Rear
|
|
Top
|
Yes
|
Yes
|
No
|
|
Bottom
|
Yes
|
Yes
|
Yes
|
|
Rear
|
Yes
|
Yes
|
Yes
|
Note: The recommended entry point for both
Electricity and Water is from the rear.
|
GAINSBOROUGH BC Electric Shower finished
in Satin Chrome with 8.5, 9.5 and 10.5kW
Power options : :
This high quality electric shower uses
the
latest technology and offers constant hot water,
a rub clean, multi mode, handset, easy to use
single dial control, and a phased shutdown
safety feature to prevent scalding, all in a
stylish satin chrome finish.
FEATURES:
Satin chrome cover with full chrome
accessory kit
Very slim styling: just 55mm deep
Push button start/stop
Single dial controls flow rate & temperature
Optimised flow rate in all water conditions
Phased shutdown safety feature
Satin chrome multi mode handset
with flexible chrome hose
Rub clean spray plate to minimise
scale build up
Height and angle adjustable on curved
chrome rail
1 Year Manufacturers Warranty
TECHNICAL: (Electrical)
8.5kW Model
Power rating at 240V 8.5kW (40A MCB)
Power rating at 230V 7.8kW (40A MCB)
9.5kW Model
Power rating at 240V 9.5kW (40A MCB)
Power rating at 230V 8.7kW (40A MCB)
10.5kW Model
Power rating at 240V 10.5kW (45A or 50A MCB)
Power rating at 230V 9.6kW (45A or 50A MCB)
TECHNICAL: (Water)
Minimum maintained running pressure
required is 0.09 MPa (0.9bar) and maximum
static pressure for the product is 1.0 MPa
(10.0bar). If pressure is below the minimum
stated, contact the local water authority.
Outlet: ½” BSP male thread
Inlet: 15mm diameter push-fit connection
|
